Free roof pitch calculator
Roof pitch calculator: angle, multiplier and roof area
Enter the rise for every 12 inches of run to get the slope angle and the multiplier that converts flat (plan) area into sloped roof surface. Add the flat area to get roof area and squares.
Live calculation
Roof pitch result
- Pitch
- 6 / 12
- Slope angle
- 26.6°
- Area multiplier
- 1.118
Planning estimate only. Verify field measurements, product coverage, bundle packaging, waste, starter, ridge cap, local code, and manufacturer instructions before purchasing.
Roof pitch factor table
The multiplier is √(rise² + 12²) ÷ 12. Multiply flat roof area by it to get the sloped surface you actually cover with shingles.
| Pitch | Angle | Multiplier | 1,000 sq ft flat becomes |
|---|---|---|---|
| 2/12 | 9.5° | 1.014 | 1,014 sq ft |
| 3/12 | 14.0° | 1.031 | 1,031 sq ft |
| 4/12 | 18.4° | 1.054 | 1,054 sq ft |
| 5/12 | 22.6° | 1.083 | 1,083 sq ft |
| 6/12 | 26.6° | 1.118 | 1,118 sq ft |
| 7/12 | 30.3° | 1.158 | 1,158 sq ft |
| 8/12 | 33.7° | 1.202 | 1,202 sq ft |
| 9/12 | 36.9° | 1.250 | 1,250 sq ft |
| 10/12 | 39.8° | 1.302 | 1,302 sq ft |
| 11/12 | 42.5° | 1.357 | 1,357 sq ft |
| 12/12 | 45.0° | 1.414 | 1,414 sq ft |
How to find roof pitch
From the attic or a gable end, hold a level horizontally against a rafter, mark 12 inches along the level, and measure straight up from that mark to the underside of the rafter. That vertical distance in inches is the rise, so 6 inches means a 6/12 pitch.
From the ground, a pitch gauge or a phone inclinometer held against the gable trim gives the angle; the table above converts angle back to pitch. On aerial imagery pitch is hard to read from directly overhead, so confirm it in the field when it changes the price.
Worked example
A roof with 2,000 sq ft of flat area at 6/12: 2,000 × 1.118 = 2,236 sq ft of sloped roof, or 22.36 squares before waste.
Roofing contractors
Measure the roof, then let the quantities follow.
Trace roofs on aerial imagery and carry squares, edges and pitch straight into estimates and proposals. Every paid plan includes unlimited self-service roof measurements.
See the measurement softwareJust one property
Need a measured roof, not another calculation?
Order a $19 human-reviewed residential roof measurement report. Typical turnaround is about one working hour for straightforward homes with usable imagery.
Order a reportQuestions
What does a 6/12 roof pitch mean?
The roof rises 6 inches for every 12 inches of horizontal run. That is about 26.6 degrees, with an area multiplier of 1.118.
How do I convert roof pitch to degrees?
Degrees = arctangent(rise ÷ 12). For example, 4/12 is 18.4°, 8/12 is 33.7° and 12/12 is 45°.
What is the roof pitch multiplier?
The factor that converts flat area into sloped surface area: √(rise² + 144) ÷ 12. A 6/12 roof has a multiplier of 1.118.
What is the lowest pitch for asphalt shingles?
Building codes based on the International Residential Code generally allow asphalt shingles at 2/12 or steeper, with extra underlayment requirements below 4/12. Check local code and the manufacturer's instructions.
Does pitch alone give total roof area?
No. You still need the flat footprint, including overhangs, or measured roof-plane geometry.