Practical guide · roof math
How to measure roof pitch
Pitch is the rise in inches for every 12 inches of horizontal run. It changes roof area, labor and which products you can use, so it is worth measuring rather than guessing.
Short answer
To measure roof pitch, hold a level horizontally against the roof or a rafter, mark 12 inches along the level, and measure straight down (or up) to the roof surface: that distance in inches is the rise, so 6 inches means 6/12. Without access, measure the slope angle with a phone inclinometer on the gable trim and convert it: pitch = 12 × tan(angle), so 26.6° is 6/12. Confirm pitch read from aerial imagery in the field when it changes the price.
Method 1: level and tape on the roof
Place one end of a 12-inch (or longer) level against the roof surface, hold it level, and measure from the 12-inch mark straight down to the roof. If you only have a shorter level, measure over 6 inches and double the result.
Method 2: from the attic or a gable end
Hold the level against the underside of a rafter, mark 12 inches along it, and measure vertically from the mark to the rafter. This keeps you off the roof and is often the most reliable reading on steep roofs.
Method 3: phone inclinometer from the ground or ladder
Lay the phone on the gable trim or a rake board and read the angle, then convert it with the table below. Take two or three readings: trim boards are not always true to the roof plane.
| Pitch | Angle | Area multiplier |
|---|---|---|
| 2/12 | 9.5° | 1.014 |
| 3/12 | 14.0° | 1.031 |
| 4/12 | 18.4° | 1.054 |
| 5/12 | 22.6° | 1.083 |
| 6/12 | 26.6° | 1.118 |
| 7/12 | 30.3° | 1.158 |
| 8/12 | 33.7° | 1.202 |
| 9/12 | 36.9° | 1.250 |
| 10/12 | 39.8° | 1.302 |
| 11/12 | 42.5° | 1.357 |
| 12/12 | 45.0° | 1.414 |
Method 4: from aerial imagery
Imagery taken straight down shows the roof outline well but hides slope, so pitch from imagery is an estimate. Shadows, oblique views and known building features help; confirm in the field before final pricing, especially on steep or mixed-pitch roofs.
Safety first
Do not walk a roof you cannot walk safely. OSHA requires fall protection for residential roofing work at 6 feet or more. The attic and ground methods give a usable reading without climbing.
Frequently asked questions
What is the most common roof pitch?
Many U.S. homes fall between 4/12 and 9/12, but it varies widely by region and style. Measure rather than assume.
How do I convert degrees to roof pitch?
Pitch = 12 × tan(angle). For example, 18.4° is 4/12, 33.7° is 8/12 and 45° is 12/12.
What pitch is too low for shingles?
Codes based on the International Residential Code generally allow asphalt shingles at 2/12 or steeper, with extra underlayment below 4/12. Check local code and the manufacturer.
Last reviewed October 27, 2026. Prices and product details change; check current terms before buying. This guide is not engineering, insurance, safety or construction advice.