Practical guide · roof math
How to measure a roof for shingles
Shingle quantity comes from the sloped roof area, not the house footprint. Get the area, adjust for pitch, add waste, and convert to squares and bundles.
Short answer
To measure a roof for shingles: find the flat area of each roof section including overhangs, multiply by the pitch factor (for example 1.118 for a 6/12 pitch), add 10 to 15 percent waste, divide by 100 to get squares, and round up. Many shingles come three bundles to a square. Example: 2,000 sq ft flat area at 6/12 is 2,236 sq ft of roof; with 10 percent waste that is 2,460 sq ft, or 24.6 squares: order 25 squares, or 74 bundles at three bundles per square.
Step by step
- Measure the flat (plan) area of each roof section, including overhangs
- Find the pitch: rise in inches per 12 inches of run
- Multiply each section's flat area by its pitch factor
- Add the sections together for total sloped area
- Add waste: roughly 10 percent for simple roofs, more for hips and valleys
- Divide by 100 for squares and round up
- Multiply squares by bundles per square for the product you are using
Pitch factor table
The pitch factor converts flat area into sloped area. It is the square root of (rise² + 12²) divided by 12.
| Pitch | Multiplier |
|---|---|
| 4/12 | 1.054 |
| 5/12 | 1.083 |
| 6/12 | 1.118 |
| 7/12 | 1.158 |
| 8/12 | 1.202 |
| 9/12 | 1.250 |
| 10/12 | 1.302 |
| 12/12 | 1.414 |
Worked example
A house with 2,000 sq ft of flat roof area at 6/12: 2,000 × 1.118 = 2,236 sq ft of sloped roof. Add 10 percent waste: 2,236 × 1.10 = 2,459.6 sq ft. Divide by 100: 24.6 squares, so 25 squares if you order by the square. In bundles, 24.6 × 3 = 73.8, rounded up to 74.
Round once at the end. Rounding at every step can add a square or more of material you do not need.
Measuring without climbing
You can get flat area from aerial imagery or plans instead of a tape on the roof. Pitch is harder to read from above, so confirm it with a pitch gauge or from the ground when it matters.
Frequently asked questions
How many square feet is a roofing square?
100 square feet of roof surface.
How much waste should I add for shingles?
Around 10 percent for simple gable roofs and 15 percent or more for roofs with many hips, valleys and dormers.
Do I measure the house footprint or the roof?
The roof. Include overhangs and multiply by the pitch factor; the footprint alone understates the area.
Last reviewed October 25, 2026. Prices and product details change; check current terms before buying. This guide is not engineering, insurance, safety or construction advice.