All free tools

Free shingle calculator

Shingle calculator: bundles, squares and edge materials

Calculate a planning quantity from roof area, waste and the manufacturer's bundles per square. Add eave, rake and ridge lengths to include drip edge, starter and ridge cap.

Live calculation

Shingle quantity result

Edges (optional, linear feet)
Squares with waste
27.5
Whole bundles
83
If ordering by the square
28 squares

Planning estimate only. Verify field measurements, product coverage, bundle packaging, waste, starter, ridge cap, local code, and manufacturer instructions before purchasing.

Bundle coverage quick reference

Most asphalt shingles are packaged so that a set number of bundles covers one square (100 sq ft). Always use the coverage printed on the product you are buying.

Bundle coverage by bundles per square
Bundles per squareCoverage per bundleCommon for
3About 33.3 sq ftMany 3-tab and architectural shingles
425 sq ftSome heavier designer and premium lines
520 sq ftSome heavy-weight or specialty lines

Bundles for common roof sizes

Bundles to order at 3 bundles per square, rounded up once. Use the higher column for hip roofs and roofs with several valleys or dormers.

Shingle bundles by roof size and waste
Roof size10% waste15% waste
15 squares (1,500 sq ft)5052
20 squares (2,000 sq ft)6669
25 squares (2,500 sq ft)8387
30 squares (3,000 sq ft)99104
35 squares (3,500 sq ft)116121

Shingles for a hip roof

A hip roof has no gable ends: every side slopes down to an eave, and hips run from the corners up to the ridge. That changes three things. Every course is cut at a hip, so allow more waste; ridge cap covers the hips as well as the ridge, so add hip length to ridge length; and there are no rakes, so starter and drip edge run along eaves only. The hip roof guide shows how to measure hip length from the plan, and the waste calculator shows what a higher waste factor adds.

Worked example

2,236 sq ft of roof with 10% waste is 24.6 squares. At three bundles per square that is 73.8, so 74 bundles. Round once at the end; rounding to 25 squares first and then multiplying gives 75.

With 184 ft of eaves and 92 ft of rakes, drip edge is 276 ft, or 28 ten-foot pieces before laps, and starter covers 276 ft if you also run it up the rakes.

Roofing contractors

Measure the roof, then let the quantities follow.

Trace roofs on aerial imagery and carry squares, edges and pitch straight into estimates and proposals. Every paid plan includes unlimited self-service roof measurements.

See the measurement software

Just one property

Need a measured roof, not another calculation?

Order a $19 human-reviewed residential roof measurement report. Typical turnaround is about one working hour for straightforward homes with usable imagery.

Order a report

Questions

How many bundles of shingles are in a square?

Three is common, but some products use four or five. Verify the selected product.

How many square feet does a bundle of shingles cover?

About 33.3 sq ft for a three-bundle-per-square product. Divide 100 by the bundles per square printed on the wrapper.

How much does a bundle of shingles weigh?

Commonly about 60 to 80 pounds, depending on the product; architectural shingles are usually heavier than 3-tab. Check the wrapper for the exact weight.

How many bundles of shingles do I need for a 2,000 sq ft roof?

2,000 sq ft of roof surface is 20 squares. At 3 bundles per square with 10% waste that is 66 bundles; with 15% waste for a hip or cut-up roof it is 69.

How much do shingles cost for a roof?

Multiply the bundles to order by the price per bundle from your supplier; enter that price above to see the material cost. Underlayment, starter, ridge cap, flashing, labor and disposal are separate line items.

Does the bundle count include starter and ridge cap?

No. Starter and ridge cap are usually separate products sold by linear coverage. Enter edge lengths to get the linear feet, then use the product's coverage.

Can I order from this number alone?

No. Verify measurements, product coverage, waste, accessories, local code, and installer requirements.