Roofing estimating software

Build roofing estimates from reviewed measurements and your own price book.

Connect roof geometry, assemblies, material quantities, labor, waste, tax, margins, options, and proposal documents in one estimate record.

Quantities round for purchasing

Material quantities round up where products must be purchased in whole units.

Money stays precise

Financial calculations use integer cents rather than floating-point currency math.

Explainable inputs

Review measurement, waste, price-book, tax, and margin inputs before sharing a proposal.

How it works

  1. 1

    Start from a reviewed measurement

    Sloped area, pitch and linear feet by edge type come from the roof you traced, not from numbers typed into a blank sheet.

  2. 2

    Apply your assemblies

    An assembly says how much of each product a square or a linear foot needs, so the same roof always produces the same material list.

  3. 3

    Add waste and round up

    Waste is applied per material, then every purchased item rounds up to whole bundles, rolls and pieces.

  4. 4

    Price from your price book

    Material and labor prices come from your own price book, with tax, discounts and margin shown before anything is sent.

  5. 5

    Offer options

    Add optional upgrade line items the homeowner can select when signing.

  6. 6

    Send the proposal

    Turn the estimate into a proposal with the framed roof image, collect an e-signature, and keep it on the same customer record.

Estimate from known inputs

The estimating workflow keeps measurements and pricing assumptions visible instead of presenting a mystery total.

  • Measurement-linked quantities
  • Reusable assemblies and price books
  • Material, labor, tax, discount, and margin review

Where each quantity comes from

A roofing estimate is mostly arithmetic on a few measurements. Keeping that arithmetic visible is what lets an office manager check a bid without re-measuring the roof.

Coverage per bundle, roll and piece varies by manufacturer and product, so set it in your assemblies to match what you actually buy.

Typical shingle re-roof line items and their source measurement
Line itemDriven by
ShinglesSquares plus waste, 3 bundles per square for most shingles
UnderlaymentSloped roof area
Ice-and-water membraneEaves and valleys
Starter stripEaves and rakes
Ridge capRidges and hips
Drip edgeEaves and rakes
Pipe bootsPenetration count
Tear-off and install laborSquares, pitch and number of layers

Check the bid before it goes out

Most expensive estimating mistakes are not arithmetic errors; they are wrong inputs. Because every quantity traces back to a measurement and an assembly, a second person can review the inputs in a few minutes instead of rebuilding the estimate.

  • Does the pitch match what you saw on site or in photos?
  • Is the waste factor right for the number of hips, valleys and dormers?
  • Are tear-off layers, decking allowance and disposal included?
  • Do material prices match your current supplier quote?
  • Is the margin what you meant to charge after tax and discounts?

Your prices, not ours

New accounts start with an illustrative starter price book so you can see how the pieces fit. Those prices are placeholders, not market data: replace them with your supplier pricing and labor rates before you send a real estimate.

Prepare homeowner-ready options

Turn the reviewed estimate into proposal options and keep approvals connected to the same customer and property record.

Proposals include e-signature capture with consent and a tamper-evident document hash. Once you connect your Stripe account, homeowners can pay by card or US bank (ACH) from the customer portal.

Retail and insurance work

MeasureRoofNow is built for contractor-priced retail estimates. It does not import or export Xactimate (ESX) files, so shops that write most of their work to insurance price lists will usually keep Xactimate for those claims.

Many contractors run both: carrier paperwork in Xactimate, and their own estimate, proposal and job record in a contractor tool. The comparison and guide below go through how to split the work.

Related guides and tools

Frequently asked questions

Can every contractor use different prices?

Yes. Tenant price books and assemblies are designed to reflect each contractor's products, labor, and pricing strategy.

Does the calculator replace a final estimate?

No. Free calculators provide planning figures; a job estimate requires verified measurements, scope, prices, and local requirements.

Can estimates become proposals?

Yes. The workflow carries estimate information into proposal generation and approval.

Can the homeowner choose upgrades?

Yes. Optional upgrade line items can be selected by the homeowner when signing the proposal.

Does it work with Xactimate?

No. There is no ESX import or export. Use Xactimate where a carrier requires it, and MeasureRoofNow for your own retail estimates and proposals.

Is there a free template I can start with?

Yes. The free roofing estimate template is a spreadsheet with the same line items and formulas, useful before you move estimates into software.