Free roof sheathing calculator
Roof sheathing calculator: 4 × 8 sheets
Enter sloped roof area and a waste allowance to get the number of 4 × 8 plywood or OSB sheets for a full re-deck. Add a sheet price to see material cost.
Live calculation
Roof sheathing result
- Area with waste
- 3,131 sq ft
- 4 × 8 sheets
- 98
- Squares covered
- 28.46
Planning estimate only. Verify field measurements, product coverage, bundle packaging, waste, starter, ridge cap, local code, and manufacturer instructions before purchasing.
Worked example
A 2,846 sq ft roof with 10% waste needs 2,846 × 1.10 = 3,130.6 sq ft of sheathing. Each 4 × 8 sheet covers 32 sq ft, so 3,130.6 ÷ 32 = 97.8 sheets: order 98.
Full re-deck or allowance?
Most re-roofs replace only damaged decking, which nobody can count until tear-off. Price it as a per-sheet allowance in the estimate and use this calculator when the whole roof needs new sheathing, such as over spaced board decking or widespread rot.
| Roof area | 4 × 8 sheets, no waste | With 10% waste |
|---|---|---|
| 1 square (100 sq ft) | 3.125 | 3.44 |
| 10 squares | 31.25 → 32 | 34.4 → 35 |
| 30 squares | 93.75 → 94 | 103.1 → 104 |
Roofing contractors
Measure the roof, then let the quantities follow.
Trace roofs on aerial imagery and carry squares, edges and pitch straight into estimates and proposals. Every paid plan includes unlimited self-service roof measurements.
See the measurement softwareJust one property
Need a measured roof, not another calculation?
Order a $19 human-reviewed residential roof measurement report. Typical turnaround is about one working hour for straightforward homes with usable imagery.
Order a reportQuestions
How many sheets of plywood for a roof?
Divide sloped roof area by 32 sq ft per 4 × 8 sheet, add waste, and round up. A 30-square roof needs about 94 sheets before waste.
What thickness of sheathing do roofs use?
7/16 in. OSB and 1/2 in. plywood are common for residential roofs, but the right thickness depends on rafter spacing, loads, local code and the shingle manufacturer's requirements.
Should a roofing estimate include new decking?
Usually as an allowance: a per-sheet price for decking replaced only if damage is found during tear-off, stated clearly in the estimate.