All free tools

Free roofing square calculator

Calculate roofing squares from square feet

One roofing square covers 100 square feet of roof surface. Enter sloped roof area and a waste percentage to see the exact and rounded planning quantities.

Live calculation

Roofing squares result

Measured squares
25
Squares with waste
27.5
Planning order
28 squares

Planning estimate only. Verify field measurements, product coverage, bundle packaging, waste, starter, ridge cap, local code, and manufacturer instructions before purchasing.

Common waste starting points

Waste covers cut-off material at hips, valleys, rakes and penetrations. These are common starting points, not rules; adjust for the product, the layout and your crew.

Waste starting points by roof type
Roof typeTypical starting waste
Simple gable, few penetrationsAbout 10%
Hip roofAbout 12–15%
Cut-up roof: many hips, valleys, dormers15% or more

How many squares is my roof?

If you do not have a measurement yet, start from the roof footprint: the area the roof covers seen from above, including the overhangs. On a two-story house that is the footprint of the house, not the total living area. Multiply the footprint by the pitch factor to get sloped area, then divide by 100 to get squares.

Sloped area = footprint × pitch factor. The pitch factor is √(rise² + 12²) ÷ 12: about 1.054 for 4/12, 1.118 for 6/12, 1.202 for 8/12, 1.302 for 10/12 and 1.414 for 12/12. The roof pitch calculator gives the factor for any pitch.

Roof squares before waste by footprint and pitch
Footprint incl. overhangs4/126/128/1210/1212/12
1,000 sq ft10.511.212.013.014.1
1,500 sq ft15.816.818.019.521.2
2,000 sq ft21.122.424.026.028.3
2,500 sq ft26.428.030.032.535.4
3,000 sq ft31.633.536.139.142.4

This assumes one pitch across the whole roof. Roofs with mixed pitches, dormers or porches need each section measured separately, which is what a roof measurement or a traced roof in measurement software gives you.

Worked example

2,500 sq ft of sloped roof with 12% waste: 2,500 × 1.12 = 2,800 sq ft, which is exactly 28 squares. Round up only when there is a remainder; 2,459.6 sq ft is 24.6 squares, so you order 25.

Roofing contractors

Measure the roof, then let the quantities follow.

Trace roofs on aerial imagery and carry squares, edges and pitch straight into estimates and proposals. Every paid plan includes unlimited self-service roof measurements.

See the measurement software

Just one property

Need a measured roof, not another calculation?

Order a $19 human-reviewed residential roof measurement report. Typical turnaround is about one working hour for straightforward homes with usable imagery.

Order a report

Questions

How many square feet are in one roofing square?

One roofing square is 100 square feet of roof surface area.

How many squares is a 2,000 sq ft roof?

2,000 sq ft of roof surface is 20 squares before waste, or 22 squares with 10% waste. If 2,000 sq ft is the house footprint, the roof is larger once you add overhangs and multiply by the pitch factor.

How do I find the square footage of my roof?

Measure the footprint the roof covers including overhangs, multiply by the pitch factor for the roof's slope, and add each section if pitches differ. Aerial measurement does the same from imagery without a ladder.

Is a roofing square 10 by 10 feet?

Yes. A square is 100 sq ft of roof surface, the same as a 10 ft × 10 ft area, regardless of its shape.

Should I add waste?

Usually, but the appropriate factor varies by roof complexity, product, layout, and installer practice.

Why does the planning order round up?

Roofing products are purchased in whole packages and shortages can interrupt the job.